Nissan Versa Forums - View Single Post - changed clockspring, relearn the steering wheel?
View Single Post
post #4 of Old 04-02-2019, 03:09 AM
Level II Member
Ecate's Avatar
Join Date: Feb 2019
Location: Ohio
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Originally Posted by suicidedoordavid View Post
Replaced the clockspring recently on my 2011 Versa hatchback due to some of the wheel controls not working.I bought a $26 unit off of ebay if that helps any. Changing the clockspring solved the issues I had, but popped up a traction control light and a airbag light up on the dash. Ran a scanner on the car, air bag has a short. Not sure if its a faulty clockspring or if the plugs of the airbag didn't secure correctly. That's part of the problem, but I'm not too worried about that because the airbag is under a recall so the dealership will be changing that soon.

A Toyota tech mentioned to me that Toyotas need to "relearn" the steering rotation from center to left and center to right full turns before the computer can be kosher with its rotation radius. Could this be the same issue with Nissan? I searched the web quite a few times and have come up with many relearning tutorials for the throttlebodies, but NOTHING for the steering wheel.
As I said yesterday, it was the SAS sensor that needed to be "relearnt".

I went to my shop today, 15 minutes and 5$....sensor is reset and relearnt, light is gone.

Versa 2012 HB S
Ecate is offline  
For the best viewing experience please update your browser to Google Chrome