Originally Posted by suicidedoordavid
Can you elaborate on who "my shop" is? Is it the dealership, or just a shop who has a scanning tool to reset? I had a friend come over with his scanning tool and read the codes. He reset the codes, but the tracsion control light came back on shortly after he reset it.
"my shop" in this case is a mechanical bodyshop. I didn't go to my dealer this time because a level 2 tool was needed and I go to the dealership only when a level 3 tool is needed (like Consult III tool like to reprogram BCM etc).
Only resetting the codes is not enough...the sensor has to be calibrated because the steering degrees are off by a lot
Take it to a bodyshop, they'll do it.