Nissan Versa Forums

Nissan Versa Forums (https://www.nissanversaforums.com/forum.php)
-   How To's (https://www.nissanversaforums.com/how-tos/)
-   -   How to: Programming key fob(TIIDA only...NOT VERSA) (https://www.nissanversaforums.com/how-tos/9017-how-programming-key-fob-tiida-only-not-versa.html)

nissantiida 06-08-2013 04:10 PM

How to: Programming key fob(TIIDA only...NOT VERSA)
 
Since i have a tiida I spent so much time researching a way to program my remote and i finally got the solution. Tiida key fob programming is different than versa(dont know why).

1. Close all doors.
2. Lock doors with drivers side power door lock switch.
3. Insert and withdraw the key 6 times. Doors should UNLOCK.
4. Turn Key to accessory position.
5. Lock doors with driverís side door lock switch.
6. Press button on remote control.
7. Remove Key.

sgvaibhav 06-08-2013 06:35 PM

thanks.

admins - this can be moved in how-to section so everyone can know.

32junky 07-05-2013 07:05 AM

Hi I have a 2004 Tiida, (a Japanese import to New Zealand) and have lost my key fob, a 2 button lock/unlock one. Does anyone know the frequency of the fob transmitter, I have obtained one that looks very like the old one and the key blank pattern is the same, the information on the fob is 5WK4 876/819. 433MHz. I have followed the very welcome recent post on programming and the doors unlock on the sixth key removal but the fob simply is not working. The battery (3V) is fine. Any ideas ? I am suspicious of the frequency. No joy from the dealer, at least $250 for a new fob. Car works well on a plain key.

nissantiida 07-06-2013 12:01 AM

Quote:

Originally Posted by 32junky (Post 106394)
Hi I have a 2004 Tiida, (a Japanese import to New Zealand) and have lost my key fob, a 2 button lock/unlock one. Does anyone know the frequency of the fob transmitter, I have obtained one that looks very like the old one and the key blank pattern is the same, the information on the fob is 5WK4 876/819. 433MHz. I have followed the very welcome recent post on programming and the doors unlock on the sixth key removal but the fob simply is not working. The battery (3V) is fine. Any ideas ? I am suspicious of the frequency. No joy from the dealer, at least $250 for a new fob. Car works well on a plain key.

I bought this and worked on my nissan tiida perfectly
New Replacement Nissan Infiniti Key Fob Keyless Entry Remote Clicker KBRASTU15 | eBay

32junky 07-06-2013 06:05 AM

HI Thanks for the rapid reply, I am not sure if I am getting into the program mode, on the sixth key withdrawal the doors unlock ok but when putting key back and turning to Acc. and locking the door again, nothing happens, no hazard lights or anything. I have tried variations on the sequence but nothing. Is this ok?? Thanks for the link, I see they will ship to New Zealand.

nissantiida 07-06-2013 08:34 PM

Quote:

Originally Posted by 32junky (Post 106554)
HI Thanks for the rapid reply, I am not sure if I am getting into the program mode, on the sixth key withdrawal the doors unlock ok but when putting key back and turning to Acc. and locking the door again, nothing happens, no hazard lights or anything. I have tried variations on the sequence but nothing. Is this ok?? Thanks for the link, I see they will ship to New Zealand.

The Nissan tiida does not flash hazards that's the difference between it and the versa
and when the doors unlock switch the key to acc then lock the doors then press any botton on the remote

32junky 07-07-2013 09:23 AM

Thanks for that, have not yet succeeded with my 433MHz fob , will await fob from your link. thank you.

iridefast 08-11-2013 12:18 PM

This worked great for my 2008 Versa. Thx for the info. Only difference is after the 6 key inserts, my hazards flashed once, instead of the doors unlocking. Everything else worked the same. Thank you.

arturorv00 10-24-2014 04:53 AM

Hi guys,

I had a Tiida 2008, I sold it and I kept one of the two fob then I bought another Tiida 2007, do you know if I can program the 2008 fob on my 2007?

nissantiida 11-13-2014 09:29 AM

Quote:

Originally Posted by arturorv00 (Post 187266)
Hi guys,

I had a Tiida 2008, I sold it and I kept one of the two fob then I bought another Tiida 2007, do you know if I can program the 2008 fob on my 2007?

Yes i think you can. try

arturorv00 11-20-2014 03:02 PM

Quote:

Originally Posted by nissantiida (Post 189986)
Yes i think you can. try

Yes actually, I already did it :)


Thanks

hero24631 05-19-2015 02:29 AM

Quote:

Originally Posted by nissantiida (Post 189986)
Yes i think you can. try

I have tried many times, but it didn't work.

My car is nissan tiida 2006. Can you help me?

Ivy Xia 10-06-2015 08:58 AM

Hi,

I have a Tiida 2007, and I lost my car key TAT. Where did you guys bought the blank key fob? Thanks a lot.

hero24631 10-22-2015 01:24 AM

Quote:

Originally Posted by Ivy Xia (Post 220834)
Hi,

I have a Tiida 2007, and I lost my car key TAT. Where did you guys bought the blank key fob? Thanks a lot.

Last time I bought it from Amazon. Remote you can make it by your self, however Key you can not make it unless you have program device make it.

seany 11-24-2015 01:25 PM

How to Programremote for Nissan Tiida
 
I have a 2006 Japanese Nissan Tiida with anti theft system. I bought the 3 in 1 remote but can't get it program. How do I program this remote. What is the frequency of the remote for a 2006 Japanese Nissan Tiida?

Jakes Sovee 02-14-2016 10:23 AM

ignition wont turn on
 
i tried using the insert key six times technique but my light is still flashing and my cars ignition wont move from off to any other position, and the steering isn't locked either, can someone assist me with this, btw i own a nissan tiida

Vik Rughoobur 08-25-2016 10:47 AM

Quote:

Originally Posted by nissantiida (Post 98681)
Since i have a tiida I spent so much time researching a way to program my remote and i finally got the solution. Tiida key fob programming is different than versa(dont know why).

1. Close all doors.
2. Lock doors with drivers side power door lock switch.
3. Insert and withdraw the key 6 times. Doors should UNLOCK.
4. Turn Key to accessory position.
5. Lock doors with driverís side door lock switch.
6. Press button on remote control.
7. Remove Key.

Hi, I tried the steps till nį3, but my doors don't UNLOCK after step 3.
I tried several times but no luck :(
Anyone else had this issue ?

I have a Tiida Latio year 2005 btw.

Thanks in advance.

awahou 01-31-2017 06:32 AM

Hi there, I am new to the forum so unsure how this works. I have an 07 Nissan Tiida Axis Autech (ex Japan) imported into my home country of New Zealand. I bought it with no Key Fobs - only one standard key. I have tried to programme several after market key fobs for the car but nothing works. The car does go into programming mode after inserting and removing the key six times and does seem to be set up for keyless entry, but I am unsure of the frequency of the fob I should be trying to programme (i.e. is it 315mHz, 433 mHz or 434 mHz?). Has anyone got an ex-Japan Tiida Axis Autech out there who could photograph the code on the back of their fob (that works) and either post it here or send it to me as message? Thanks!!!

Ashleigh Beer 06-04-2017 11:18 PM

2005 Tiida keyless entry
 
I have recently bought a 2005 Nissan Tiida second hand.
The lady selling to me has said there are issues with the keyless entry. The car is locked/unlocked via. A smaller key, which to turn on the car is inserted into the keyless ignition to start like normal.

I am wanting to purchase an immobiliser/alarm remote to lock/unlock the car without using a key.

How would I go about purchasing this?

ravin 06-21-2017 11:40 PM

I have a Nissan Tiida 2005 I lost my remote can someone advise me the right frequency for the remote. Do we have to cut the key with the remote we want to program into the ignition or the transponder key will do? I am programming the remote but have not cut the key but using another key that starts my car.

Aygun Fayka Mamedova 01-14-2018 05:21 PM

Quote:

Originally Posted by arturorv00 (Post 187266)
Hi guys,

I had a Tiida 2008, I sold it and I kept one of the two fob then I bought another Tiida 2007, do you know if I can program the 2008 fob on my 2007?

Hi dear friend please can you tell me the way how you programmed 2008 on 2007 nissan tiida? I have tiida 2007.

KI Drakes 06-04-2018 11:22 PM

Bringing this back up.

My example is a 2012 Nissan Tiida out of Japan, non-keyless entry model. Purchased the key fobs from amazon like the ones suggested. Tried it and got to the point where the doors unlocked but no success when pressing the button on the keyfob. Now after several tries the doors no longer unlock after the 6th time inserting and removing the key.

Any one can help?
MY car only has one key hole (driver door) and it gets annoying when I have to go all the way around to the driver door to open the car especially when I have my kids with me and its raining or something.

Versa15 08-05-2018 10:56 PM

11 Attachment(s)
What eBay listed as the correct key remote for my Versa was not the same part number. I've noticed several times eBay "this fits/doesn't fit" info is incorrect for U.S. Versa.

So I bought one with same part number. It was a used oem Nissan remote. $10 for the key remote and $3 for local hardware store to cut the blank.


All times are GMT. The time now is 01:14 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome