Nissan Versa Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
My new stereo has "learning" support for steering controls, and I would like to add them in. The stereo head unit has two connections, SW1 and SW2 which I guess go to the steering controls 1 and 2. However, in looking at the FSM I'm a little confused. The FSM lists the two positive connections as BR/GR and V/GR. I am assuming that BR is Brown, but what are V, and GR?
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #2 ·
Ok, I just installed the steering wheel controls, and it looks like something isn't right. I am not getting signal off of them. Wire missing? Anyone have any suggestions? I would like to check at wherever the wire connects under the dash but I'm not sure where other than the stereo.
 

·
Registered
Joined
·
19 Posts
The info I have is pins 6 and 16 on the radio harness are the Steering wheel controls. For the record I have never been able to get the SWC wires off one of those chinese double Dins to work so good luck.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top