Nissan Versa Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
3,270 Posts
Yes please take pics and do a write-up. We need a good How-to section even for the basic stuff.

A few universal tips for brakes is; suspend the caliper with zip ties so it's not hanging from the brake line when installing the rotor, spray your new rotor with brake clean to get the oil off, be sure to use silicone/brake quiet on the back of the pads, clean out the old grease on the slider pins and install fresh grease, I like to put some lubricant on the piston boot to ensure a long life and no buckling when compressing the piston.

Goodluck, and if your doing anything to the rears I have no idea. I'ven never owned a car with drums. I gotta find a conversion kit because when it come time to do brakes I don't want to put that back on my car.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top