Nissan Versa Forums banner
1 - 1 of 7 Posts

· Registered
102 Posts
Cut it. I have done several of them. I typically use a protractor and a dremmel.

You can use blue painters tape to draw/cut on. Also you need to make sure there is no other interference. So look at what also may hit, if you raise it. As far as the location, just go straight up, don't get tricky moving it, it is 10X more work.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.