Dynatek Intake Manifold

5472 Views 16 Replies 10 Participants Last post by Tubtub, Sep 1, 2013

BioVector

Discussion Starter · Dec 22, 2008

Ok...I have been emailing Richard from Dynatek about the Versa intake. I need your help people!!!
Here was his response from me asking about the intake manifold and header.
-------
John,

We'd love to produce the Versa intake but could never get a minimum of 10 Versa owners willing to step up to purchase it. We have to have 10 Versa owners willling to buy to justiftyy the production run-so far we have only had 2-3 who have expressed interest. Same for long-tube header. If you can help stimulate more interest, we'd love to tool up for the production run.

Richard
------

Who is SERIOUSLY interested. I am really wanting this, and I am sure that there are some of you who are also. OBX currently has a header for hatches, but the sedan version comes out in a month or so. From what I have seen, I would rather choose this company. Who is with me??

The price is $699. It produces 19 hp to the ground. Here is a pic of the manifold and dyno sheet:

http://share.shutterfly.com/share/received/welcome.sfly?fid=d8362ec12a4247bf&sid=2AcsWzFi4csWKm

Be sure to click album to get a look of both pictures. The manifold is completely bolt on too. It works with aftermarket CAI systems.

1 - 17 of 17 Posts

superskunk

· #2 · Dec 22, 2008

you already know im down... im waiting for his response so i can go check it out in person... should be interesting... i hope he lets me drive it...

BioVector

Discussion Starter · #3 · Dec 23, 2008

Sa-weet. He also knows that I am driving to Vegas for the manifold and header. We will both get them first hand. :35:

mightyversa

· #4 · Mar 22, 2009

I was one who started the whole gathering and got more than 10 people. I am definitely interested, I have the money now!!

#1Tango

· #5 · Mar 22, 2009

im so down to get this, i just can't manage to save $700 and not spend it haha. btw the obx header fits the sedan

(atleast just the header itself to the block, i didn't use the downpipe)

mightyversa

· #6 · Mar 22, 2009

So he does have a working Header design?...stainless steel by any chance?.....How much is this going to run?

#1Tango

· #7 · Mar 22, 2009

in siphon magazine, it said they had the manifold, and by the time the magazine was out they would have a long tube header and a turbo already being tested on the versa.

AusTiida

· #8 · Mar 24, 2009

A turb for the Versa. Nice.

That's a mod I'd like to invest in, keep the rolling stock 'stock' and make a sleeper for the "Oh my god we just got whooped by a girls car" reaction

superskunk

· #9 · Mar 24, 2009

AusTiida said:
A turb for the Versa. Nice.

That's a mod I'd like to invest in, keep the rolling stock 'stock' and make a sleeper for the "Oh my god we just got whooped by a girls car" reaction

girls car? :74:

AusTiida

· #10 · Mar 24, 2009

Haha, yeah that's all I hear around here.

Most of my mates are V8 dickheads or drive supe'd up imports so I am so the brunt of all their jokes....not that I mind of course, I'm more than happy to have an excuse for a little 'bogan bashing' when they mouth off

I always laugh and say I own a girls car myself, because especially in australia, the Tiida was completely 100% marketed at women, which is why it flopped over here and they are only now changing tact and advertising at the 'older generation' where nan and grandad can get in the car easily.

So it's either the girls car or the fossil rocket

Kaz

· #11 · Apr 3, 2009

/bump.

Any news on the Dynatek Header and Intake Manifolds? and if they are produced where can i buy either or both? thanks

#1Tango

· #12 · Apr 3, 2009

not enough interest in them. you would have to contact them through email. i don't think its gonna happen... they were supposed to come out with a long tube header and turbo... nothing...

luthernil

· #13 · Mar 5, 2012

Kaz said:
/bump.

Any news on the Dynatek Header and Intake Manifolds? and if they are produced where can i buy either or both? thanks

A bump for the second time around. But just wanna add this one. Dynatek combines the improved power output of the 1.8L Dual VVTi motor from 119 wheel hp to 146 wheel hp. On the other hand the single biggest gain came from the custom aluminum intake manifold, though the off-road pipe which is actually very helpful.

randy

· #14 · Mar 5, 2012

Will this work on a mr20?

G

· #15 · Mar 5, 2012

dude if they can get the ball rolling again in so down

aressler

· #16 · Sep 1, 2013

intake manifold

A little late... but I'm in.

Tubtub

· #17 · Sep 1, 2013

aressler said:
A little late... but I'm in.

I dont think this project went any further than a prototype ...

1 - 17 of 17 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.