[Versa_Mom]

Hello, Versa09.
Did you get those lights working?
We got the same set (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=400066386351&ssPageName=STRK:MEWNX:IT). We haven't installed/tested them yet because the car is in the shop.
The problem we are having is that we ordered a set of HID's (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230374986937&ssPageName=STRK:MEWNX:IT) for these lights.
We ordered bulb no. 9003, but they don't fit on these projector lights. We can't test them on the original headlights because the car didn't have any ( we bought it w/ a damaged front end).
The bulbs have a tag that says H4, I contacted the seller (different from the projectors), he says that 9003 and H4 are the same bulb.
Anyone know if that's correct? or if it's a different bulb for the projectors? I wouldn't think so, since you should be able to use the stock lights, correct?

Thx for any help.

 

[Versa_Mom]

Darn!

Are these custom made then?
http://cgi.ebay.com/ebaymotors/HID-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Thx for the prompt response.

 

[Versa_Mom]

Thx!

Well, I contacted the Projectors seller, he says I need an H3 bulb, stock ones use H4.
In order to have HIDs though, we'll need to modify the projectors. I'm trying to figure out what kind of modification, to decide if we'll use the HID's or not.
If anyone has done this, let me know.

I'll let you know if our halos work once we install. Let us know if you find out anything else on them.

 

[Versa_Mom]

Here's the seller's response regarding the modification:

the modification is, you'll need to drill a hold on the low beam bulb cover to let the HID bulb wire go through, and of course rewire it with the main headlight socket.

I'm totally lost, but ofcourse, my husband will be doing the work, and perhaps he has a a better understanding.

 

[Versa_Mom]

Not yet. I should be getting my Versa on Tues. I'll let you know how it goes.
I don't have HIDs though. I had to send back the H4 bulb I orginally got, because the projectors use an H3 bulb.

 

[Versa_Mom]

pleez post pix for your beams, do your lights adjust up and down easily? cuz mine don't go up or down at all, im trying to get them to replace them, constant battle.

Do you have HID's on yours?
My husband was able to adjust the headlights, slightly, they don't adjust very much, but our lighting is still terrible.
If it wasn't for the fogs help, we wouldn't be able to see very much. Still with the fogs on, it's only about 15 feet of lighting, not very much when you're going fast. When we travel we try to use our high beams as much as possible, but there's almost always someone coming the other way, and it's not nice for them.