Nissan Versa Forums banner
1 - 2 of 2 Posts

· Registered
2 Posts
To program a remote/keyfob, follow this closely.
Close door
Hit lock on the master switch
Insert key in and out of the ignition about 7 times or until the hazard lights flash
Turn key to on position when hazards flash (don't start engine)
Press any button on the remote (hazards will blink twice to indicate programmed)
Hit unlock on master switch.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.