Nissan Versa Forums banner

1 - 20 of 26 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter #1 (Edited by Moderator)
Since i have a tiida I spent so much time researching a way to program my remote and i finally got the solution. Tiida key fob programming is different than versa(dont know why).

1. Close all doors.
2. Lock doors with drivers side power door lock switch.
3. Insert and withdraw the key 6 times. Doors should UNLOCK.
4. Turn Key to accessory position.
5. Lock doors with driver’s side door lock switch.
6. Press button on remote control.
7. Remove Key.
 

·
Registered
Joined
·
3 Posts
Hi I have a 2004 Tiida, (a Japanese import to New Zealand) and have lost my key fob, a 2 button lock/unlock one. Does anyone know the frequency of the fob transmitter, I have obtained one that looks very like the old one and the key blank pattern is the same, the information on the fob is 5WK4 876/819. 433MHz. I have followed the very welcome recent post on programming and the doors unlock on the sixth key removal but the fob simply is not working. The battery (3V) is fine. Any ideas ? I am suspicious of the frequency. No joy from the dealer, at least $250 for a new fob. Car works well on a plain key.
 

·
Registered
Joined
·
75 Posts
Discussion Starter #4
Hi I have a 2004 Tiida, (a Japanese import to New Zealand) and have lost my key fob, a 2 button lock/unlock one. Does anyone know the frequency of the fob transmitter, I have obtained one that looks very like the old one and the key blank pattern is the same, the information on the fob is 5WK4 876/819. 433MHz. I have followed the very welcome recent post on programming and the doors unlock on the sixth key removal but the fob simply is not working. The battery (3V) is fine. Any ideas ? I am suspicious of the frequency. No joy from the dealer, at least $250 for a new fob. Car works well on a plain key.
I bought this and worked on my nissan tiida perfectly
New Replacement Nissan Infiniti Key Fob Keyless Entry Remote Clicker KBRASTU15 | eBay
 

·
Registered
Joined
·
3 Posts
HI Thanks for the rapid reply, I am not sure if I am getting into the program mode, on the sixth key withdrawal the doors unlock ok but when putting key back and turning to Acc. and locking the door again, nothing happens, no hazard lights or anything. I have tried variations on the sequence but nothing. Is this ok?? Thanks for the link, I see they will ship to New Zealand.
 

·
Registered
Joined
·
75 Posts
Discussion Starter #6
HI Thanks for the rapid reply, I am not sure if I am getting into the program mode, on the sixth key withdrawal the doors unlock ok but when putting key back and turning to Acc. and locking the door again, nothing happens, no hazard lights or anything. I have tried variations on the sequence but nothing. Is this ok?? Thanks for the link, I see they will ship to New Zealand.
The Nissan tiida does not flash hazards that's the difference between it and the versa
and when the doors unlock switch the key to acc then lock the doors then press any botton on the remote
 

·
Registered
Joined
·
1 Posts
This worked great for my 2008 Versa. Thx for the info. Only difference is after the 6 key inserts, my hazards flashed once, instead of the doors unlocking. Everything else worked the same. Thank you.
 

·
Registered
Joined
·
15 Posts
Hi guys,

I had a Tiida 2008, I sold it and I kept one of the two fob then I bought another Tiida 2007, do you know if I can program the 2008 fob on my 2007?
 

·
Registered
Joined
·
2 Posts
Hi,

I have a Tiida 2007, and I lost my car key TAT. Where did you guys bought the blank key fob? Thanks a lot.
Last time I bought it from Amazon. Remote you can make it by your self, however Key you can not make it unless you have program device make it.
 

·
Registered
Joined
·
1 Posts
How to Programremote for Nissan Tiida

I have a 2006 Japanese Nissan Tiida with anti theft system. I bought the 3 in 1 remote but can't get it program. How do I program this remote. What is the frequency of the remote for a 2006 Japanese Nissan Tiida?
 

·
Registered
Joined
·
1 Posts
ignition wont turn on

i tried using the insert key six times technique but my light is still flashing and my cars ignition wont move from off to any other position, and the steering isn't locked either, can someone assist me with this, btw i own a nissan tiida
 

·
Registered
Joined
·
1 Posts
Since i have a tiida I spent so much time researching a way to program my remote and i finally got the solution. Tiida key fob programming is different than versa(dont know why).

1. Close all doors.
2. Lock doors with drivers side power door lock switch.
3. Insert and withdraw the key 6 times. Doors should UNLOCK.
4. Turn Key to accessory position.
5. Lock doors with driver’s side door lock switch.
6. Press button on remote control.
7. Remove Key.
Hi, I tried the steps till n°3, but my doors don't UNLOCK after step 3.
I tried several times but no luck :(
Anyone else had this issue ?

I have a Tiida Latio year 2005 btw.

Thanks in advance.
 

·
Registered
Joined
·
1 Posts
Hi there, I am new to the forum so unsure how this works. I have an 07 Nissan Tiida Axis Autech (ex Japan) imported into my home country of New Zealand. I bought it with no Key Fobs - only one standard key. I have tried to programme several after market key fobs for the car but nothing works. The car does go into programming mode after inserting and removing the key six times and does seem to be set up for keyless entry, but I am unsure of the frequency of the fob I should be trying to programme (i.e. is it 315mHz, 433 mHz or 434 mHz?). Has anyone got an ex-Japan Tiida Axis Autech out there who could photograph the code on the back of their fob (that works) and either post it here or send it to me as message? Thanks!!!
 

·
Registered
Joined
·
1 Posts
2005 Tiida keyless entry

I have recently bought a 2005 Nissan Tiida second hand.
The lady selling to me has said there are issues with the keyless entry. The car is locked/unlocked via. A smaller key, which to turn on the car is inserted into the keyless ignition to start like normal.

I am wanting to purchase an immobiliser/alarm remote to lock/unlock the car without using a key.

How would I go about purchasing this?
 

·
Registered
Joined
·
1 Posts
I have a Nissan Tiida 2005 I lost my remote can someone advise me the right frequency for the remote. Do we have to cut the key with the remote we want to program into the ignition or the transponder key will do? I am programming the remote but have not cut the key but using another key that starts my car.
 
1 - 20 of 26 Posts
Top