Nissan Versa Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
75 Posts
Since i have a tiida I spent so much time researching a way to program my remote and i finally got the solution. Tiida key fob programming is different than versa(dont know why).

1. Close all doors.
2. Lock doors with drivers side power door lock switch.
3. Insert and withdraw the key 6 times. Doors should UNLOCK.
4. Turn Key to accessory position.
5. Lock doors with driver’s side door lock switch.
6. Press button on remote control.
7. Remove Key.
 

·
Registered
Joined
·
75 Posts
Discussion Starter · #4 ·
Hi I have a 2004 Tiida, (a Japanese import to New Zealand) and have lost my key fob, a 2 button lock/unlock one. Does anyone know the frequency of the fob transmitter, I have obtained one that looks very like the old one and the key blank pattern is the same, the information on the fob is 5WK4 876/819. 433MHz. I have followed the very welcome recent post on programming and the doors unlock on the sixth key removal but the fob simply is not working. The battery (3V) is fine. Any ideas ? I am suspicious of the frequency. No joy from the dealer, at least $250 for a new fob. Car works well on a plain key.
I bought this and worked on my nissan tiida perfectly
New Replacement Nissan Infiniti Key Fob Keyless Entry Remote Clicker KBRASTU15 | eBay
 

·
Registered
Joined
·
75 Posts
Discussion Starter · #6 ·
HI Thanks for the rapid reply, I am not sure if I am getting into the program mode, on the sixth key withdrawal the doors unlock ok but when putting key back and turning to Acc. and locking the door again, nothing happens, no hazard lights or anything. I have tried variations on the sequence but nothing. Is this ok?? Thanks for the link, I see they will ship to New Zealand.
The Nissan tiida does not flash hazards that's the difference between it and the versa
and when the doors unlock switch the key to acc then lock the doors then press any botton on the remote
 
1 - 4 of 4 Posts
Top