Nissan Versa Forums banner

How to: Programming key fob(TIIDA only...NOT VERSA)

73753 Views 28 Replies 20 Participants Last post by  snake.psg1986
Since i have a tiida I spent so much time researching a way to program my remote and i finally got the solution. Tiida key fob programming is different than versa(dont know why).

1. Close all doors.
2. Lock doors with drivers side power door lock switch.
3. Insert and withdraw the key 6 times. Doors should UNLOCK.
4. Turn Key to accessory position.
5. Lock doors with driver’s side door lock switch.
6. Press button on remote control.
7. Remove Key.
1 - 1 of 29 Posts
This worked great for my 2008 Versa. Thx for the info. Only difference is after the 6 key inserts, my hazards flashed once, instead of the doors unlocking. Everything else worked the same. Thank you.
1 - 1 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top