Nissan Versa Forums banner

Nissan Versa Coilover Help

8152 Views 20 Replies 10 Participants Last post by  bigpapapolska
Hey all,

I was looking for some assistance in finding the right coilovers for my versa. I have a 2010 Nissan Versa 1.6L Base. Right now i am on Megan Racing Springs which are 2" front and 1.75" rear. I also am sitting on 16s, 205/50. and these wheels brought me only to be .5" lower than stock... I am looking to be pretty damn close to sitting on the ground. I'm looking for coilovers that will literally slam my car to the ground!

Let me know what coilovers would be best for this!!!!!
1 - 20 of 21 Posts
As far as I know TEIN is the best. Any pics? I have a 2010 1.6 as well. :D

By the way, welcome to the forums. :thumbsup:
D2 makes some of the best coilovers out there i have them on my versa it handles like its on rails there about $1000 bucks there 36 way ajustable
Try the ksport coilovers. They will probably be the best coilover choice to drop your car to the ground. I have the tanabes coilovers on the lowest settings and there is still a 1 inch gap. If you want comfort and a decent amount of drop, then go for the tanabes.
Tanabe coilovers? I've never heard of those.
Tanabe coilovers? I've never heard of those.
versaspeed sells them. Id go with the Tein coils
versaspeed sells them. Id go with the Tein coils
I personally will go with Tein as well. And I'd honestly switch my Eibach springs to Tien, but the Eibachs were $100 cheaper
I personally will go with Tein as well. And I'd honestly switch my Eibach springs to Tien, but the Eibachs were $100 cheaper
How much were your eibachs? I got my Tein springs for $200 shipped from ebay.
I got the Eibach's for around $190 with shipping include and a 2yr guarantee. I would've got a Tien but I could not for the life of me find one below $300.
3
i think ive attached some pictures of my car in its current state! check it out, and i also have the back end of it to show my new muffler to my new exhaust set up!! but as you can see it is quite up high, and i need MOAR LOW!

Attachments

See less See more
Looking real good! What coil overs did you get and it that the BRM catback?
Looks very good. I'm not sure but as far as I know all coilovers work the same way. You should be able to adjust the height. Do you have a pic of your coilovers?
He said thats how his car sits now with the springs not coilovers. It looks good mine sits about the same with Tein springs. Whats the situation with your exhaust? axle back or catback?
That's right. I got confused.
i think ive attached some pictures of my car in its current state! check it out, and i also have the back end of it to show my new muffler to my new exhaust set up!! but as you can see it is quite up high, and i need MOAR LOW!
Dude i gotta say, I'm loving that white mustache on the front. :thumb2:
For comfort and quality go for tein or tanabe. for max drop go with ksport or d2 (they are almost the exact same product, the shocks are made by the same company and the company that puts their name on them makes the hardware) and I think Megan makes coils for the cube, same situation and the k's and d2's. good luck.
answered my question, i guess its between ksport and D2
i hope you went D2 i just ordered them for my versa:) do you have pictures??
D2 makes some of the best coilovers out there i have them on my versa it handles like its on rails there about $1000 bucks there 36 way ajustable
hey Mooseman how do you have your D2 adjusted i just got some on mine today and im trying to find a good setting for them i have 18x8 35 offset
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top