Nissan Versa Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,334 Posts
Uh, the ABS unit initiating at first roll is more of a vibrating rattle sort of noise not a clunk. Many Versa exhibit a clunk or solid click at a first move forward, it is from high mileage wearing the front wheel bearing enough to allow the bearing preload torque to fall off, the bearing then moves slightly on the axle stub. Nissan says to retorque the axle to correct number again (it will be slightly low) to get it back tight.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top