HR16DE installed in 2007 Micra C+C
The HR16DE is a 1,598 cc (98 cu in) straight-4 engine. It produces 108 to 118 PS (79 to 87 kW; 107 to 116 hp) and 153Nm torque @ 4000rpm.
Bore : 78.0 mm (3.07 in) ; Stroke 83.6 mm (3.29 in) ; Capacity : 1598 cc
It is fitted to the following vehicles:
Nissan Micra/March K12 Sport SR & 160SR
Nissan Micra C+C
Nissan Micra/March K13 (South America)
Nissan Cube (In Europe)
Nissan Bluebird Sylphy (In China)
Nissan Tiida (In China, Thailand and Global Oversea Market)
Nissan Qashqai (115 hp, 160 nm )
Nissan Latio (In Malaysia)
Nissan Grand Livina (Malaysia)
Nissan Versa (North America, base model sedan only)
[[Nissan NV200 Vanette]]
New Nissan Sylphy (In Thailand and China)
Hello, I had the crazy idea of swapping the 1.6 CVT to a 3.5 manual in my 2012 Versa. As far as I can tell I have enough engine bay space to do so. I know it would need to fab some engine mounts and transmission bracket. Along with replacing the axle shafts. Brakes and suspension would all be...
Looking to install a cherry bomb muffler (don't ask, I just want it to be loud but still legal ) and I can't find anywhere what the pipe diameter is on a 2009 Versa Sedan with the 1.6l . If anyone knows please let me know, thank you!
Long story short, I bought a Nissan Tiida from someone but there was no ECM inside.
I have the original BCM and from that I found out my ECM reference is 23710-1JZ1A
But upon research I can't find the same ECM online.
Nissan Tiida 1.6L
2009 I think
VIN : JN1CC13C89T025579
I have a 2014 Nissan Versa Note and I have been having some very minor issues when driving. I noticed the gas mileage is reading lower than it used to when I bought it. I used to get 427 miles at full (i have a picture from 3 years ago) but now I get just about 350. I also have noticed that it...
So i bought an 07 Versa with 78,000 miles. Whenever I drive it over a speed bump or a bumpy road, I hear a “clunking” noise that sounds like its coming from right below where the center console would be (if this car had one). I’m very mechanically inclined, and I’ve always fixed issues on my...