[Versa S 2009]

You could prolly get the nissan OEM power lock switch off of ebay, and the wiring harness for the door, and it would prolly hook right up. But this is my two cents, I really dont know, but it is what I would try and do. So far everything ive done to the versa, has been plug and play, or already prewired. So check around the door to see if maybe you already have the wire harness and its just tied up somewhere in the door. I have a good feeling my suggesstion would work. I dont think there is a fuse for it. It should be tied into the fuse box located right underneath ur dimmer switch in the fuse called ELEC PARTS, but thats my opinion as well. Hope any of this info helps....

Wiring harness for door: http://www.courtesyparts.com/versa-...trical/240-wiring/-c-7153_7154_7187_7188.html

 

[Versa S 2009]

I woud assume there would be continuous power. When you remove ur drivers kick panel on the bottom left corner, you will see a bunch of wires (or that could be because I had a remote start put in, lol), or a big black cord , and somewhere around there I believe there is a white plastic connector with some wires running in it. Thats a start. But I would first take a look at ur setup, and decide what to start doing.

 

[Versa S 2009]

I used to be from MD. I was born in annapolis, moved to Glen burnie. My dads from Baltimore. We moved to NC about 5yrs ago.

 

[Versa S 2009]

Im planning on some vacation time in September, and had plans to drive up to MD again for family, and see some things. Maybe we can have a meet while im up there. I would love to talk with some of you guys, and take some pics, maybe.