Reset oil change light?

i don't think mine has one. are you sure it's not the low oil pressure light?

I've been going to the dealership for my 3750 miles oil changes and on the receipt it says reset oil life system. My 2001 Honda civic had a similar thing. Don't remember exactly what the symbol was but it would come on after so many miles if you didn't reset it. If i remember correctly on the civic i had to push in the trip meter reset button then turn the key on until it went out or reset itself etc. So i'm assuming the Versa has something similar. Anyone know what i'm talking about?

06_warrior said:

Anyone know what i'm talking about?

Click to expand...

Yeah, my '00 GMC has an oil life monitor (but not my Versa, as far as I know).

To reset the truck, I turn the ignition on and without starting, pump the gas three times full stroke.

Versa's don't have this.

thats an oil pressure light. Not an oil change light.

bigdaddychia said:

thats an oil pressure light. Not an oil change light.

Click to expand...

No like i said and if you read it, i'm talking about the oil life reset light/switch.

06_warrior said:

No like i said and if you read it, i'm talking about the oil life reset light/switch.

Click to expand...

the only light that turns on for oil is RED, and thats when your screwed.
versas don't have what your talking about.

#1Tango said:

the only light that turns on for oil is RED, and thats when your screwed.
versas don't have what your talking about.

Click to expand...

Cool, the dealership must put that down on the paper for every oil change they do as part of the service if the vehicle has the reset function.

My 2015 versa has an oil life indicator. It shows the wrench when it's time to change the oil. To reset, turn ignition to on position. While on Trip A, you press the switch for 3 seconds while it shows the wrench, so you have to do it quickly. It'll start flashing. You can change how many miles by pressing it once again. Each press changes it by 500 miles. I.E. you want to change from 2500 to 3000.... wait 5 seconds, press once more. You're done.