Nissan Versa Forums banner

Steering wheel control buttons.

638 Views 13 Replies 6 Participants Last post by  amc49
Hi Everyone. I’m new on here and I could use some help please. I have 2011 Nissan Versa. I was trying to replace my clock spring I guess that’s what’s called behind the wheel. I had a really difficult time getting the yellow airbag plug and the grey one next to it off. I was trying to pull the grey one out with a screw driver and by accident I cut off three wires that were to the grey plug. The wires came out with the metal prong inside. Does anyone have a picture diagram they can help me out please so I can put back in if possible I don’t want to blow anything?
a picture would help me out a lot. Thank you. Also do you know if that harness could be bought? I try to look it up online shows me everything but what I need.
Thank you everyone for your help.
1 - 1 of 14 Posts
These sections will have info, and pinouts on Yellow/Grey connectors:
SRS for airbags
AV for radio controls
EC for ACSD/cruise controls
LT if switches lighted

As for a harness, those wires are part of the main harness. The only way to get that is to gut everything forward of the seats. You can however do a cut/splice with something from a junkyard
if one is close by.

There is an old post somewhere around here on adding steering wheel buttons for the radio. If you can find it, it definately will help you.
  • Like
Reactions: 1
1 - 1 of 14 Posts