Nissan Versa Forums banner

Steering Wheel Control issue after radio swap

4398 Views 5 Replies 6 Participants Last post by  amc49
I swapped out my factory radio of my 2015 Versa Note SV with a new Kenwood touch screen and added the ASWC-1 for retention of steering wheel controls. I wire all of it up as shown, and it shows it finds it as a Kenwood but controls didn't work. Tried setting them up manually and only could get volume buttons to work. When I tried to program seek up nothing happened nor with Seek down. Has anyone else gone through this before? Also is there a way to retain the factory USB port with aftermarket radio. I am fine with the Bluetooth being a aftermarket mic and through headunit.
1 - 1 of 6 Posts
Same issue

Same issue. Please let me know if you find the solution.:frown Thanks:smile
1 - 1 of 6 Posts
Top