TM-222 Diagnostic Shifter - Where Are Those Terminals?

453 Views 6 Replies 4 Participants Last post by SlickVersa, 2 mo ago

alex7003

Discussion Starter · 3 mo ago

Hi everyone, I am new to this forum. I've recently got 2013 Versa for my teenage kid with shifter that needs a manual override (push on plastic lever) to be moved from the Parking. I was told by seller that "likely solenoid needs to be replaced". Not sure if it is the case, I suspect one of two small switches, they do not last long. Took the cover off, and it is a pure madness to check any of switch or solenoid, I may have to remove shifter off the car. I've found Nissan manual online. TM-222 SHIFT LOCK SYSTEM has those steps:
1.CHECK STOP LAMP SWITCH E13 Terminal 4
2.CHECK A/T SHIFT SELECTOR M37 terminal 6
3.CHECK GROUND CIRCUIT M37 terminal 6
4.CHECK STOP LAMP SWITCH POWER CIRCUIT E13 Terminal 3
5.CHECK A/T SHIFT SELECTOR POWER CIRCUIT M37 Terminal 5
Does anyone know where are those terminals (E13 and M37) and is it OK to use voltmeter to cheek the voltages? Thank you for likes but if you have the answer, please share!

Save

1 - 2 of 7 Posts

PoMan

· #3 · 3 mo ago

Is the only problem you are trying to fix is the shifter is locked in park?

Are you positive the stop lamp switch (top of the brake pedal) is functioning? Do the brake lights light up every time the brake pedal is pressed?

These switches are notorious for loosing good internal contact. They can be disassembled and repaired by cleaning and bending the contacts for better contact.

Save

PoMan

· #6 · 2 mo ago

SlickVersa said:
Please correct me if I am wrong, but I think that if this switch (Stop Lamp Switch Assembly) is failing, it generates C1116 error code.

I can't confirm this. I do know it won't generate a MIL, won't allow you to shift from park and won't allow you to engage the starter.

Save

1 - 2 of 7 Posts

Top Contributors this Month