Nissan Versa Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
10 Posts
I drive a 2015 sedan. A short shifter with a threaded end would be my number one. I was so disappointed when I tried to unscrew my knob the first couple days of having the car. Also some air bag suspension. Iv seen some for the 1st gen but not the 2nd. I'm sure these will eventually be made but the sooner the better!
 

· Registered
Joined
·
10 Posts
If it's a standard why not just cut the shaft and thread it?
I had thought about doing that or even getting a metal thread adapter and sticking it on with epoxy, but then I'd never be able to bring it back to stock. All I wanted was to change the color so I got crafty and bought a bag of ballons and slipped one over. Only cost $1 for a bag of 20 and its held up. I half expected it to rip within a few days, but the same ballons has been on about a month with no signs of wear. So I'm happy with it lol
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top