What all needs changing ?

I purchased a wrecked 2011 Versa S with NO key and damaged wiring harness .
I went to the local junkyard and was able to purchase the Wiring Harness, ECM, BCM, and ignition switch with Key.
The donor car was also a 2011 Versa S , so everything should be the same , right ?

So after I replaced everything as mentioned above I go to try to start it and get a No Crank, No start issue
dash lights , radio etc comes on but when turn the key to start , NOTHING , engine will NOT turn over

Nothing wrong with starter I can get it to turn over
Don't hear fuel pump


Any ideas ?

Would it be the security ?

Thanks in advance