Nissan Versa Forums banner

Your Versa's Stance!

139004 Views 164 Replies 56 Participants Last post by  nolowversa
post:
-pics
-suspension mods (springs or coils, braces, and brands)
-wheel and tire specs
-any problems, clearance issues, etc...
-anything else you want to list
-------------------

I WILL START

(most resent pic, i have new [shorter] tires now and will be lower by next weekend.)



-ksport coils, and ultraracing under braces and rear sway bar.
-17x7 +40 enkei wheels, 205/40-17 tires (225/45-17 pictured)
-i CAN NOT go over speed bumps (braces are about 2" off the ground)


----------



POST UP!!!!!!!!
See less See more
1 - 20 of 165 Posts
come on everybody.


lowered the front today
See less See more
HOWD YOU GET SO LOW!!!! THAT IS SIK! and you answered my question if we can fit 225 wide tires under the versa.

-DC Strut Bar, Tein S Tech springs
-Kyowa KR210 17x7, Falken Zeix 912 205/40/17
-wish i could get a lil lower and had wider tires haha
See less See more
what drop is that is that a 5.0 drop does it change the drivability of the car / extensive camber change?


Tanabe 1.5" lowering springs, whiteline rear swaybar, ultra racing trunk brace and strut bar
Stock wheels and tire size
Only problems are of course speed bumps and curbs
See less See more
what is that lip made of?

its a mach 1 mustang oem lip.





what drop is that is that a 5.0 drop does it change the drivability of the car / extensive camber change?


its right at 4" actually lowered (plus smaller than stock tires lower it a small amount). it rubs a little in town, but barely at highway speeds. the camber is really close to spec, and if i actually got it aliagned it would be in spec.



the front still has 1/2" adjustment, but the rear is maxed :(
Still looks sick man id prolly drop it that low
blindsnyper, love the stance. You've done so much to your Versa since you bought it new, keep it up! What's up with the multi colored paint on the driver side?
*didn't want to make a new forum post*

What's the recommended wheel/tire sizing that will look semi decent with enough clearance to go over speed bumps, etc?

I'm totally new to the process of modification, Versa's my first car.

I like the stock wheel clearance, but it does look a lil high even for stock wheels.
^that's a ten:D
very awesome
Always loved your car!
post:
-pics
-suspension mods (springs or coils, braces, and brands)
-wheel and tire specs
-any problems, clearance issues, etc...
-anything else you want to list
-------------------

I WILL START

(most resent pic, i have new [shorter] tires now and will be lower by next weekend.)



-ksport coils, and ultraracing under braces and rear sway bar.
-17x7 +40 enkei wheels, 205/40-17 tires (225/45-17 pictured)
-i CAN NOT go over speed bumps (braces are about 2" off the ground)


----------



POST UP!!!!!!!!
aiight so you said you cant go over speed bumps but is it cause of braces or cause of the lowness? Also any camber problems?
Nissan Versa Forums - GTversaman's Album: V - Picture

Nissan Versa Forums - GTversaman's Album: V - Picture

Im running megan springs no problems really did not even dorp aligment after lowered just not as low as i want to be

running tenzo RS5 wheels with 215/45/17 tires offest is +45
4
stock suspencion,
sportmax xxr 962 17x7 40 offset.
235/40/17 front 215/45/17 rear.
will go with 235/40/17 all around.
looking to lower it with tanabe lowering springs and a nice window tint.







See less See more
2
Heres the set up for the V:
-tanabe lowering springs
-18x8 racing hart m6 wrapped with falken ziex 225/40/18
-no issues whatsoever



See less See more
1 - 20 of 165 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top